2.5 litre Auto Drinker Trough - Our smallest drinker / trough is ideal for all variety of livestock: pigs, sheep, ewes, goats, kids, and even horses cows and our canine friends.
It's solid with curved edges to protect your livestock. Naw, bite, rub - it'll stand up to it all! Suitable for both high and low pressure (mains and gravity) water supply this unit will bolt to a wall, post or gate via the two holes in the rear and save you hours of carrying water and at the same time give your animals a continuous supply of fresh drinking water.
Comes complete with float valve assembly with a 1/2" male threaded
connector as is found on toilet cisterns and water tanks which will take either a straight or elbow adapter to connect either 15mm copper or plastic pipe or 20/25mm blue MDPE pipe. It can of course be adapted to fit any type of pipework - just ask for assistance.
The water connection can be made on either the left or right hand side and so the water supply can come from the ground, from the left or right, from above, or from behind.
Full spares are available should you ever need them.
Finished with no sharp edges to protect your animals.
Fitted with a BS1212/PT2 mains pressure ball valve as standard. Drain hole and rubber bung are included.
Holes in rear to secure to a wall at your preferred mounting height.
£49.99
23 litre Auto Drinker Trough - As per the 9 litre. Especially good for cattle and should your water freeze in wintertime, can be used as a fixed trough and manually filled with a bucket holding a good reserve.
£65.00
Replacement Float Valve Pack - Suitable for 2.5 and 3 litre drinkers, complete float valve pack as illustrated below
Replacement Lid - Galvanised lid complete with securing catch suitable for 2.5 litre drinkers
Float valve components - Components are available separately if required, however you may decide it is better value to order a complete float valve pack above.
We can supply a full range of spares for all our drinkers - just ask!