PLUMBING & FIXINGS 
Coach Screw - Suitable for mounting our drinkers onto wooden surfaces. 2.5 litre drinkers require two. 9/14/23 litre drinkers require four. BZP M10 x 70mm.
Fischer Sleeve Anchor - Suitable for
mounting our drinkers onto masonry surfaces (brick/block/concrete) 2.5/3/9/14 litre drinkers
require two. 23 litre drinkers require four. 8mm x 69mm. Use an 8mm masonry bit to predrill the hole to a depth of 69mm.
MDPE Pipe - 20mm sold by the metre - simply add the number of metres you require to the cart prior to checking out.
MDPE Equal Tee - 20mm
MDPE Elbow - 20mm
MDPE Coupler - 20mm
MDPE Pipe Stiffener - 20mm inserts / pipe stiffeners - use at every joint (I.e. a tee would require 3 inserts)
1/2" female to 20mm MDPE Elbow - these fit directly onto our drinkers, the elbow connector allows you to connect to a supply pipe coming from the ground, above, or behind.
1/2" female to 20mm MDPE Straight - these fit directly onto our drinkers, the straight connector allows you to connect to a supply pipe coming from the left or right.
MDPE Stopcock - 20mm - 20mm
MDPE Wallplate - 20mm for mounting an outside tap
Note: Images are for illustration only. Items supplied may vary in colour, brand, design.